Clear Acrylic Sheet Cast PMMA Perspex 1-20mm Custom Cut to Size for DIY Signage Display
Standard shipping included
Quality issue support
Fast & reliable support
Secure payment
Standard shipping is included in the price of listed standard-size products. Contact us for expedited shipping or delivery arrangements for custom or oversized orders. Returns are accepted for quality problems under our refund policy, without limiting applicable statutory rights.
- 100x100mm(1PC) / 10mm - $33.97
- 100x100mm(1PC) / 12mm - $34.60
- 100x100mm(1PC) / 15mm - $35.73
- 100x100mm(1PC) / 20mm - $37.87
- 100x150mm(1PC) / 1mm - $31.12
- 100x150mm(1PC) / 2mm - $31.49
- 100x150mm(1PC) / 3mm - $31.90
- 100x150mm(1PC) / 4mm - $32.28
- 100x150mm(1PC) / 5mm - $32.69
- 100x150mm(1PC) / 6mm - $33.54
- 100x150mm(1PC) / 8mm - $33.90
- 100x150mm(1PC) / 10mm - $34.28
- 100x150mm(1PC) / 12mm - $34.88
- 100x150mm(1PC) / 15mm - $36.27
- 100x150mm(1PC) / 20mm - $38.43
- 100x200mm(1PC) / 1mm - $31.48
- 100x100mm(1PC) / 1mm - $31.11
- 100x100mm(1PC) / 2mm - $31.22
- 100x100mm(1PC) / 3mm - $31.49
- 100x100mm(1PC) / 4mm - $31.76
- 100x100mm(1PC) / 5mm - $32.08
- 100x100mm(1PC) / 6mm - $32.28
- 100x100mm(1PC) / 8mm - $32.88
- 150x150mm(1PC) / 8mm - $36.82
- 150x150mm(1PC) / 10mm - $38.73
- 150x150mm(1PC) / 12mm - $40.81
- 150x150mm(1PC) / 15mm - $43.00
- 150x150mm(1PC) / 20mm - $49.52
- 150x200mm(1PC) / 1mm - $31.55
- 150x200mm(1PC) / 2mm - $32.35
- 150x200mm(1PC) / 3mm - $33.64
- 150x200mm(1PC) / 4mm - $34.60
- 150x200mm(1PC) / 5mm - $35.86
- 150x200mm(1PC) / 6mm - $36.82
- 150x200mm(1PC) / 8mm - $39.03
- 150x200mm(1PC) / 10mm - $41.42
- 150x200mm(1PC) / 12mm - $45.35
- 150x200mm(1PC) / 15mm - $49.52
- 150x200mm(1PC) / 20mm - $53.85
- 100x200mm(1PC) / 2mm - $31.88
- 100x200mm(1PC) / 3mm - $32.35
- 100x200mm(1PC) / 4mm - $33.44
- 100x200mm(1PC) / 5mm - $34.08
- 100x200mm(1PC) / 6mm - $36.49
- 100x200mm(1PC) / 8mm - $38.12
- 100x200mm(1PC) / 10mm - $39.28
- 100x200mm(1PC) / 12mm - $42.20
- 100x200mm(1PC) / 15mm - $44.94
- 100x200mm(1PC) / 20mm - $47.77
- 150x150mm(1PC) / 1mm - $31.23
- 150x150mm(1PC) / 2mm - $31.90
- 150x150mm(1PC) / 3mm - $32.57
- 150x150mm(1PC) / 4mm - $33.64
- 150x150mm(1PC) / 5mm - $34.45
- 150x150mm(1PC) / 6mm - $34.90
- 200x300mm(1PC) / 6mm - $44.64
- 200x300mm(1PC) / 8mm - $47.89
- 200x300mm(1PC) / 10mm - $55.37
- 200x300mm(1PC) / 12mm - $58.63
- 200x300mm(1PC) / 15mm - $59.46
- 200x300mm(1PC) / 20mm - $61.65
- 250x300mm(1PC) / 1mm - $34.62
- 250x300mm(1PC) / 2mm - $36.74
- 250x300mm(1PC) / 3mm - $39.08
- 250x300mm(1PC) / 4mm - $41.42
- 250x300mm(1PC) / 5mm - $44.94
- 250x300mm(1PC) / 6mm - $48.55
- 250x300mm(1PC) / 8mm - $55.56
- 250x300mm(1PC) / 10mm - $59.57
- 250x300mm(1PC) / 12mm - $62.85
- 250x300mm(1PC) / 15mm - $64.92
- 200x200mm(1PC) / 1mm - $31.86
- 200x200mm(1PC) / 2mm - $33.44
- 200x200mm(1PC) / 3mm - $34.60
- 200x200mm(1PC) / 4mm - $36.06
- 200x200mm(1PC) / 5mm - $38.05
- 200x200mm(1PC) / 6mm - $39.03
- 200x200mm(1PC) / 8mm - $42.29
- 200x200mm(1PC) / 10mm - $45.45
- 200x200mm(1PC) / 12mm - $46.30
- 200x200mm(1PC) / 15mm - $55.70
- 200x200mm(1PC) / 20mm - $58.77
- 200x300mm(1PC) / 1mm - $32.47
- 200x300mm(1PC) / 2mm - $34.60
- 200x300mm(1PC) / 3mm - $36.82
- 200x300mm(1PC) / 4mm - $38.15
- 200x300mm(1PC) / 5mm - $41.42
- 297x210mm(1PC) / 5mm - $41.31
- 297x210mm(1PC) / 6mm - $44.57
- 297x210mm(1PC) / 8mm - $50.98
- 297x210mm(1PC) / 10mm - $55.67
- 297x210mm(1PC) / 12mm - $62.68
- 297x210mm(1PC) / 15mm - $64.96
- 297x210mm(1PC) / 20mm - $78.19
- 250x300mm(1PC) / 20mm - $66.92
- 300x300mm(1PC) / 1mm - $33.87
- 300x300mm(1PC) / 2mm - $36.99
- 300x300mm(1PC) / 3mm - $40.46
- 300x300mm(1PC) / 4mm - $43.46
- 300x300mm(1PC) / 5mm - $47.64
- 300x300mm(1PC) / 6mm - $41.10
- 300x300mm(1PC) / 8mm - $48.28
- 300x300mm(1PC) / 10mm - $56.98
- 300x300mm(1PC) / 12mm - $63.21
- 300x300mm(1PC) / 15mm - $74.57
- 300x300mm(1PC) / 20mm - $87.43
- 297x210mm(1PC) / 1mm - $33.70
- 297x210mm(1PC) / 2mm - $34.70
- 297x210mm(1PC) / 3mm - $37.78
- 297x210mm(1PC) / 4mm - $40.04
Clear Acrylic Sheet Cast PMMA Perspex 1-20mm Custom Cut to Size for DIY Signage Display
PRODUCT DETAILS
Premium Cast Clear Acrylic Sheets - Professional Grade PMMA
About This Clear Acrylic Sheet
Our premium cast clear acrylic sheets (also known as PMMA or Perspex) offer exceptional optical clarity with 92% light transmission - even clearer than glass. These transparent acrylic boards are manufactured using advanced casting technology, ensuring superior surface quality, consistent thickness, and excellent dimensional stability for precision applications.
Ideal for engineers, fabricators, DIY enthusiasts, and businesses requiring custom plastic components. From single prototypes to production runs, we handle orders of any size with the same professional-grade precision.
Technical Specifications
| Material | Cast Acrylic (PMMA - Polymethyl Methacrylate) |
| Available Sizes |
|
| Available Thickness | 1mm (0.04") | 2mm (0.08") | 3mm (0.12") | 4mm (0.16") | 5mm (0.20") | 6mm (0.24") | 8mm (0.31") | 10mm (0.39") | 12mm (0.47") | 15mm (0.59") | 20mm (0.79") |
| Transparency | 92% light transmission - crystal clear optical grade |
| Surface Finish | High gloss both sides with protective film |
| Tolerance | ±0.03mm dimensional accuracy |
| Impact Strength | 17x stronger than glass, shatter-resistant |
| Weight | 50% lighter than glass (1.19 g/cm³) |
| UV Resistance | Excellent outdoor durability, non-yellowing |
| Temperature Range | -40°C to 80°C (-40°F to 176°F) |
| Origin | Manufactured with precision equipment |
| Customization | Yes - Custom sizes and shapes available |
Why Choose Cast Acrylic PMMA?
🔬 Superior Optical Clarity
Cast acrylic offers the highest optical quality with crystal-clear transparency. Perfect for applications where visual presentation matters - display cases, signage, picture frames, and protective shields.
⚡ Exceptional Strength
17 times more impact-resistant than glass while weighing only half as much. Shatter-resistant properties make it safer for public spaces, workshops, and home applications.
🛠️ Easy to Machine
Excellent machinability with CNC routers, laser cutters, and standard workshop tools. Clean edges when cut, drills without cracking, and bonds perfectly with acrylic adhesives.
🌤️ Weather Resistant
UV-stabilized formula resists yellowing and maintains clarity for years outdoors. Ideal for exterior signage, greenhouse panels, and architectural glazing.
🔥 Thermoformable
Can be heated and shaped into curves, domes, and custom profiles. Perfect for creating protective covers, light fixtures, and decorative elements.
💰 Cost-Effective
More affordable than glass with superior performance. Lower shipping costs due to lightweight properties and reduced breakage risk.
Common Applications & Use Cases
🏭 Industrial & Manufacturing
- Machine guards and safety shields
- Protective barriers and enclosures
- Control panel windows
- Equipment covers
- Quality inspection windows
🏪 Retail & Commercial
- Display cases and merchandising
- Point-of-sale signage
- Sneeze guards and hygiene barriers
- Menu boards and information displays
- Shelf talkers and product holders
🎨 Creative & DIY Projects
- Custom picture frames and art displays
- Laser engraving projects
- Wedding signs and event decor
- Craft projects and jewelry making
- Model making and prototypes
🏠 Home & Architecture
- Window replacements and glazing
- Furniture components (table tops, shelves)
- Kitchen backsplashes
- Bathroom panels and shower doors
- Aquarium construction
Can't Find Your Size? We Offer Custom Fabrication
Our professional cutting service provides precision-cut acrylic sheets to your exact specifications. Whether you need non-standard dimensions, special shapes, or complex profiles, our CNC equipment delivers ±0.03mm accuracy.
Value-Added Processing Services
Transform your acrylic sheets with our professional fabrication services:
Create custom angles and curves with precise heat bending
High-resolution full-color graphics directly on acrylic
Professional adhesive bonding for seamless assemblies
Mirror-finish polishing or frosted sandblasted effects
Why Choose BeePlastic?
🎯 No Minimum Order Quantity
Order a single sheet for prototyping or bulk quantities for production. We serve everyone from individual makers to Fortune 500 companies.
📐 Industrial Precision
±0.03mm accuracy using professional CNC equipment. Every cut is measured and verified to ensure perfect dimensions.
🎓 15+ Years Expertise
Extensive experience working with acrylic, PEEK, POM, ABS, and 50+ engineering plastics. Technical support from experienced engineers.
🚀 Fast Processing
Most standard orders ship within 2-5 business days. Custom fabrication typically completes in 5-7 business days.
🌍 International Shipping
Free standard shipping to USA, Europe, and Australia. Professional packaging ensures damage-free delivery.
🔧 One-Stop Solution
Complete fabrication capabilities including CNC machining, laser cutting, bending, printing, and finishing - all under one roof.
Working with Acrylic - Tips & Best Practices
Cutting & Machining
- Laser Cutting: Produces smooth, polished edges ideal for intricate designs. Best for sheets up to 20mm thick.
- CNC Routing: Excellent for larger parts and thicker materials. Achieves tight tolerances and complex profiles.
- Saw Cutting: Use fine-tooth blades (10-12 TPI) and slow feed rates to prevent chipping.
- Drilling: Use sharp drill bits designed for plastics. Start with a pilot hole for accuracy.
Bonding & Assembly
- Solvent cements (like Weld-On #3 or #4) create invisible joints
- Two-part acrylic adhesives work well for dissimilar materials
- Clean surfaces thoroughly with isopropyl alcohol before bonding
- Clamp or weight pieces during curing for best results
Finishing & Polishing
- Remove protective film only after all fabrication is complete
- Use progressively finer grits (400 → 800 → 1500 → 2000) for polishing edges
- Flame polishing creates glass-like edges (requires experience)
- Clean with mild soap and water - avoid ammonia-based cleaners
Cast Acrylic vs. Other Materials
| Property | Cast Acrylic | Extruded Acrylic | Glass | Polycarbonate |
|---|---|---|---|---|
| Optical Clarity | ★★★★★ Excellent | ★★★★☆ Very Good | ★★★★☆ Good | ★★★☆☆ Moderate |
| Impact Strength | ★★★★☆ 17x glass | ★★★☆☆ 10x glass | ★☆☆☆☆ Baseline | ★★★★★ 250x glass |
| Scratch Resistance | ★★★☆☆ Moderate | ★★☆☆☆ Low | ★★★★★ Excellent | ★★☆☆☆ Low |
| Machining Quality | ★★★★★ Excellent | ★★★☆☆ Good | ★☆☆☆☆ Difficult | ★★★☆☆ Good |
| Cost | $$$ Moderate | $$ Low | $$ Low | $$$$ High |
| Best For | Display, signage, optics | Budget applications | Traditional windows | Safety shields, high-impact |
Frequently Asked Questions
Q: What's the difference between cast and extruded acrylic?
A: Cast acrylic is manufactured by pouring liquid acrylic into molds, resulting in superior optical quality, better molecular weight, and cleaner machining characteristics. It's the preferred choice for applications requiring high clarity and precision fabrication. Extruded acrylic is more economical but has lower optical quality and can stress-crack more easily when machined.
Q: Can I order custom sizes not listed?
A: Absolutely! We specialize in custom fabrication with no minimum order quantity. Visit our Cut to Size service page or contact us at beeplastic@beeplastic.com with your specifications.
Q: How do I choose the right thickness?
A: Common guidelines:
- 1-3mm: Small crafts, picture frames, lightweight signs
- 4-6mm: Medium signs, display cases, protective barriers
- 8-12mm: Furniture, large displays, structural applications
- 15-20mm: Heavy-duty uses, aquariums, architectural projects
Q: Is acrylic suitable for outdoor use?
A: Yes! Our cast acrylic is UV-stabilized and maintains clarity for years outdoors. It resists yellowing better than many plastics and can withstand temperature extremes from -40°C to 80°C. Perfect for exterior signage, greenhouse panels, and architectural applications.
Q: Can I drill holes or cut this acrylic myself?
A: Yes, acrylic is DIY-friendly! Use sharp drill bits designed for plastics, work slowly to prevent cracking, and keep the material cool. For cutting, circular saws with fine-tooth blades or laser cutters work best. Or let us handle the fabrication with our CNC machining services.
Q: How do I clean and maintain acrylic sheets?
A: Use mild soap and water with a soft cloth. Avoid paper towels which can scratch. Never use ammonia-based cleaners (like Windex), acetone, or abrasive materials. For stubborn marks, use specialized acrylic cleaners. The protective film should remain on until installation is complete.
Q: What's your shipping policy?
A: We offer free standard shipping (delivery time varies by location). For urgent orders, expedited shipping is available at an additional cost - please contact our customer service at beeplastic@beeplastic.com for expedited shipping quotes, as express carrier fees cannot be covered by our standard margins.
Q: Do you offer other materials besides clear acrylic?
A: Yes! Browse our complete Acrylic collection including colored, frosted, and specialty finishes. We also work with PEEK, POM, PEI, ABS, nylon, polycarbonate, and 50+ other engineering plastics.
Q: What's your minimum order quantity?
A: There is NO minimum order quantity! Whether you need one prototype piece or a production run of thousands, we handle orders of all sizes with the same precision and care.
Need Technical Assistance?
Our engineering team has 15+ years of experience working with acrylic and engineering plastics. We can help with:
- Material selection and specification advice
- Design optimization for manufacturability
- Tolerances and dimensional requirements
- Finishing and assembly recommendations
- Volume pricing and lead time estimates
Contact us: beeplastic@beeplastic.com
REVIEWS
SHIPPING & RETURNS
Shipping
Standard shipping is included in the price of listed standard-size products. For expedited shipping, custom or oversized orders, or a delivery deadline, contact us to confirm available arrangements and any additional charges before ordering. See our shipping policy for details.
Returns and quality problems
Our voluntary return policy covers quality problems; we do not offer change-of-mind returns. This does not limit applicable statutory rights, including withdrawal rights for eligible consumer purchases. For the return process and eligibility, see our refund policy.
If an item is defective, damaged or incorrect, email beeplastic@beeplastic.com with your order number, a description and clear photos. Please contact us before shipping an item back.
CUSTOM FABRICATION
Can't Find the Right Size or Specification?
If our standard products don't match your requirements, we offer comprehensive custom fabrication services. Whether you need a specific dimension, unique shape, different thickness, or special material grade - we can manufacture it to your exact specifications.
Our Custom Capabilities
Precision Machining:
CNC machining, laser cutting, drilling, milling, and turning with ±0.03mm tolerance. Suitable for complex geometries and tight specifications.
Size Range:
Thickness: 0.5mm - 300mm
Maximum dimensions: 2000mm × 3000mm
Custom shapes: Round, square, rectangular, irregular profiles, holes, cutouts, and complex contours
Available Materials:
HDPE, PTFE, POM, Nylon, PEEK, ABS, PC, PMMA, PP, PVC, and more. Food-grade, conductive, anti-static, and flame-retardant options available.
Processing Methods:
CNC machining, laser cutting, injection molding, thermoforming, welding, and bonding. Multiple finishing options including polishing, sandblasting, and color matching.
Why Choose Custom Fabrication?
Perfect Fit: Parts manufactured to your exact specifications eliminate the need for modifications or adaptations.
No Minimum Order: Whether you need 1 piece for testing or 10,000 pieces for production, we accommodate all order sizes.
Cost Savings on Volume: Volume pricing is available for bulk custom orders.
Expert Technical Support: Our engineering team provides free consultation on material selection and design optimization.
Custom Order Process
Step 1: Contact us with your requirements - dimensions, material preferences, quantity, and application details. Technical drawings (PDF, CAD, DWG) are helpful but not required.
Step 2: Receive a detailed quotation, normally within 1 business day, including pricing, production lead time, and technical recommendations.
Step 3: Approve the quote and specifications. For complex projects, we can provide samples for testing before full production.
Step 4: Production begins. Typical lead time is 7-15 days depending on complexity and quantity.
Step 5: Quality inspection and shipping. Every custom piece undergoes strict dimensional checks before delivery.
Industries We Serve
Automotive components, food processing equipment, medical devices, laboratory instruments, packaging machinery, semiconductor equipment, industrial automation, and more.
Get Your Custom Quote Today
Don't see the exact size or specification you need? Let us manufacture it for you.
Contact us: beeplastic@beeplastic.com
Response time: Reply within 1 business day
What to include: Material type, dimensions, quantity, and intended application. If you have technical drawings, please attach them. If not, simply describe what you need and our team will assist you.
Not sure about material selection or specifications? No problem - our technical team will guide you through the process and recommend the best solution for your application.
RECOMMENDED PRODUCTS
Precision Plastic Parts We've Delivered
From transparent acrylic displays to precision gears, high-temp phenolic components to custom seals
——we machine any plastic, any complexity.
Custom Plastic Fabrication
1pc to 10,000+ | ±0.03mm | No MOQ
General
HDPE
PP
PVC
ABS
Engineering
POM
Nylon
PC
PMMA
High-Performance
PEEK
PEI
PTFE
Composites
FR-4
G10
Flexible
TPU
Silicone
Why Choose BeePlastic?
Request a Quote
Industries: Automotive • Medical • Food • Lab • Semiconductor
Free consultation → beeplastic@beeplastic.com
RECENTLY VIEWED PRODUCTS
QUOTE IN 1 BUSINESS DAY
Send project details; email drawing attachments
QUALITY ISSUE SUPPORT
See our refund policy for return eligibility
PAYMENT OPTIONS
Available payment methods are shown at checkout
CONTACT OUR TEAM
Email your project or order question